
Shark Diver
New member
steve_k":4xsjde2i said:Shark Diver":4xsjde2i said:jlbaxe":4xsjde2i said:How is the SLO through a Bogner 20th XTC cab???
Am I going to have to get a Soldano 2x12 or 412 cab?
Steve K what IR, Mic and any Eq are you using through the Torpedo Live?
Best cab speakers for it? Think classic rock to Warren Haynes type music…
Damn I didn't even think about a cab![]()
![]()
![]()
Well, I'm not as cute as Steve K. but -
I use the Eddie cab IR and the 87 mic, no eq. That is with my SLO head. I like the 87 because it seems to have a high mid presence that makes the tone pop. It is also more "in the room" sounding to me. The 57 seems a little smoother and compressed - more like a recorded tone. Now, I can get great tones with either mic by simply repositioning the mic from center out. Just depends which mic. I currently am only at 4% which I think is almost dead center. It is very articulate this way. The stock position was 42%.
Now with an X99 and the power sim I used lots of different cabs. The key here was to find the power amp sim and the stage (Pentode or Tri) that worked well together and then demo the cabs. I would find a cab IR that I thought WTF and then I would go back and change the power amp and flip the pentose/tri and all of a sudden I got it. The V30 ir works great with the PP-EL34 on tri - at least for me. And when I first tried the ppel34 it is in pentode mode and I disliked it a lot - flipped the switch and bam - good tunes. This is my favorite single coil IR for more classic tones.
Point is you have to play with it a little.
The mic and cab I use are a little lowend-ish, but by placing the mic toward the center it cleans up. I found this better than having a mic/cab that had a higher end response and pulling the mic from center to darken it up. Just my preference. Kind of finding my base tone with the cab/mic combo and using the mic position to dial it in.
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
I use the British V30 cab sim and a 57. Moved the mic a little off center. I ride the presence a little high on the amp. I just turn the EQ on and cut the upper mids a bit and the high. With the FRFR monitors, it doesn't need much help.
That combo worked for me as well.